Carney All Seasons Blog: Archive for December, 2011

Happy New Year’s Eve from Your Bucks & Montgomery County Plumbing and HVAC Contractor!

Saturday, December 31st, 2011

Everyone here wishes you a Happy New Year! New Year’s is one of the best times to reflect on all the good things that have happened this year and make plans for the next. We hope that you are able to achieve all of your resolutions! If one of your resolutions is to be more environmentally friendly, remember that annual maintenance of your HVAC system will keep it running as efficiently as possible. And here is some New Year’s trivia to start your day: the first Time Square New Year’s Eve ball was dropped in 1907 after fireworks were banned in New York City. Today’s ball weighs nearly 12 thousand pounds and is 12 feet in diameter!

Continue Reading

5 Ways to Improve IAQ and Reduce Air Pollution

Wednesday, December 28th, 2011

Your Horsham home may be haven for pollutants that can cause irritation to the upper respiratory system of anyone who comes inside. These allergens and pollutants are easy to remove however by taking some simple steps such as the five listed below:

  1. HEPA Filtration – Step one is to use HEPA filtration to remove as much of what is on the floor as possible through vacuuming. HEPA vacuum cleaners can remove years of cleaners, solvents, dander, mineral build ups and other toxins that tend to accumulate in spaces that normal vacuums cannot reach. It may be a bit of an investment, but a high powered vacuum cleaner can have a tremendously positive impact on your lifestyle and reduce pollutants.
  2. Stop Outside Stuff from Coming In – Some of the worst pollutants your home will face are from outside. So, make sure you have doormats at every door and that your family and friends remove their shoes before coming inside. You can have a second mat inside as a friendly reminder that cleaning the shoes is not an option but a strict necessity.
  3. Humidity Helps – Humidity levels between 30% and 50% reduce the presence of dust mites, molds, bacteria and many other indoor pollutants. Air conditioning in the summer is helpful to reduce humidity, though a dehumidifier is recommended for those days when the temperature doesn’t justify full blown air conditioning. Additionally, look for sources of excess humidity like leaky pipes, standing water, or clothes drying.
  4. Radon Testing – We’ve recently discovered that Radon is the second leading cause of lung cancer in the United States each year and can be present in almost any home. It is not a location specific pollutant, so it’s important to have your indoor air tested for Radon as soon as you move into a new home. Once testing is done, have any problems repaired immediately.
  5. Cut the Chemicals – There are a number of high quality household cleaners that don’t contain chemicals. Avoid ammonia, bleach and other chemical laden cleaners that can inflame allergies and pollute the water supply. Your home will be just as clean and you won’t feel uncomfortable afterwards.

Proper cleaning and careful selection of compounds and what goes into your air will help you avoid creating new air quality problems in the house. Done right, this process will make everyone in your home feel more comfortable.

Continue Reading

Why Do I Need Water Filtration?

Monday, December 26th, 2011

Like most Langhorne homeowners, you’re probably asking yourself why you need water filtration – what exactly happens to your water that makes it necessary to install an entire new system in your home to keep it clean? There are a few things that might be an issue here and your specific circumstances will determine which affects you the most.

Common Water Contaminants

While most homes don’t suffer from all of the following, there is a good chance you will have at least some of these contaminants in your home:

  • Sediment
  • Bacteria
  • Chlorine
  • Copper
  • Fluoride
  • Iron
  • Manganese
  • Nitrate
  • Sulfate
  • Viruses

This is only a partial list too – there are a number of other, more exotic substances that might be in your water. Now, this doesn’t mean your water suffers from all or even most of these problems. Many homes only have one or two contaminants and they may not even be immediately dangerous to your health.

But, here’s the issue – and the number one reason that most homes should have a water filtration system. Things change. While your home may not suffer from virus or sulfate infiltration now, it could later. Things happen to the water supply – pipes get old, things get into the water tables and chemical levels change at treatment plants.

The only way to combat these problems is to have a good water filtration system already in place. Specifically, a reverse osmosis system that can remove all of these contaminants through an advanced chemical process.

Testing Comes First

To make sure you have the right system in place to tackle your water contamination problems, make sure you first contact someone to perform full water testing on your home’s drinking water. Because some of these contaminants must be treated with chemical infusions through pumps or special cartridges, it is important to know in advance what you’re up against.

Continue Reading

Merry Christmas From Your Bucks & Montgomery County Plumbing and HVAC Contractor!

Saturday, December 24th, 2011

We wish you a very Merry Christmas! We plan on eating lots of great food and spending time with our loved ones. We hope that you get everything you want under the tree this year! Fun holiday fact: the song “Jingle Bells” was inspired by sleigh races that were common in Medford, Massachusetts, where the song was written. It was originally called “One Horse Open Sleigh.” Here are the original lyrics (courtesy of Wikipedia), Merry Christmas!

Dashing through the snow

In a one-horse open sleigh

O’er the hills we go

Laughing all the way.

Bells on bobtail ring

Making spirits bright

Oh what sport to ride and sing

A sleighing song tonight.

|: chorus 😐

Jingle bells, jingle bells

Jingle all the way!

O what joy it is to ride

In a one-horse open sleigh.

A day or two ago

I thought I’d take a ride

And soon Miss Fannie Bright

Was seated by my side

The horse was lean and lank

Misfortune seemed his lot

He got into a drifted bank

And we – we got upsot

|: chorus 😐

A day or two ago

The story I must tell

I went out on the snow

And on my back I fell

A gent was riding by

In a one-horse open sleigh

He laughed as there I sprawling lie

But quickly drove away

|: chorus 😐

Now the ground is white

Go it while you’re young

Take the girls tonight

And sing this sleighing song

Just get a bobtailed bay

Two forty is his speed

Hitch him to an open sleigh

And crack! You’ll take the lead.

|: chorus 😐

Don’t be left in the cold this year by foregoing the annual maintenance of your HVAC system. Regular maintenance not only keeps your system working efficiently but it also makes sure it is working safely. Keep your family warm and safe this winter!

Continue Reading

Signs of an Undersized Furnace

Wednesday, December 21st, 2011

If you’re purchasing a new furnace for your Buckingham home, you want to avoid buying one that is undersized for your particular space. To do that, here are some common signs that the furnace isn’t powerful enough for the heating needs of your home. These signs might appear for an older furnace as well, especially as it ages and loses its ability to provide adequate heat for your home.

Maintaining Temperature

The most common (and in many cases only) sign that your furnace is undersized is that the device simply doesn’t maintain the temperature in your home properly. This means that when turned on to full and left for a few hours, your furnace doesn’t heat your home to the thermostat setting.

This can be due to an improper load calculation or a load calculation that wasn’t taken at all. The perfectly sized furnace will heat your home evenly on the coldest day your area is likely to have. So, undersizing should be pretty evident – if it doesn’t heat your home evenly and it’s not exceptionally cold outside, you might not have enough BTUs under the hood.

How to Fix the Problem

The problem is one that varies depending on the severity of the undersizing. Modern furnaces are often available with two stages, meaning they can operate at both a low BTU rating (often around 40K or so) and a higher BTU rating (70K or higher). This is the perfect solution for homeowners worried about undersizing because it ensures that your home always has enough heat in reserve should the weather get exceptionally cold.

For example, most furnaces are sized for extremely low temperatures, but if the temperature jumps up to 50 degrees F outside, your furnace is now oversized for that weather. A two stage furnace offers solutions for both common conditions and extreme conditions and will resolve most of the concern you have about undersizing and not having enough heat to offset outdoor temperatures.

Continue Reading

Happy Hanukkah from Your Bucks & Montgomery County Plumbing and HVAC Contractor!

Tuesday, December 20th, 2011

Happy Hanukkah from everyone at Carney Plumbing, Heating & Cooling! We hope you have an amazing holiday full of friends, family, and great food. Whether you have a Menorah or a Christmas tree in your house, we wish you very happy holiday. And since one of the great traditions of this time of year is delicious food, here is a recipe we found for Crispy Potato Pancakes:

Crispy Potato Pancakes

“Here’s a potato pancake that doesn’t take much time to make and is just right for two people. Weekends become our time to relax and enjoy life, and this is one of our favorite treats. -Nancy Salinas, Grand Rapids, Minnesota”

INGREDIENTS:

2 medium potatoes, peeled

1 egg

1/3 cup chopped onion

1 tablespoon all-purpose flour

1/2 teaspoon salt

1/4 teaspoon pepper

1/4 teaspoon garlic powder

vegetable oil

DIRECTIONS:

  1. Finely grate potatoes; drain any liquid. Place potatoes in a bowl. Add egg, onion, flour, salt, pepper and garlic powder; mix well. In a large skillet, heat 1/8 in. of oil over medium heat. Drop batter by 1/4 cupfuls; press lightly to flatten. Fry until golden brown on both sides. Serve immediately.

For more details, visit allrecipes.com.

Continue Reading

What Makes a Furnace High Efficiency?

Monday, December 19th, 2011

You’ve probably heard about the new lines of high efficiency furnaces being released by popular home heating companies, but what exactly is different about these high efficiency devices from your Chalfont home’s current furnace? Let’s take a closer look at what a high efficiency furnace offers and why it can save you money.

Added Features

A high efficiency furnace uses familiar technology in a new way to reduce the amount of energy lost when combustion takes place. This means:

  • Sealed Combustion – Instead of open combustion which allows heat to escape during and after the combustion process, a high efficiency furnace uses a sealed chamber with carefully measured and fed airflow to burn fuel and produce heat. Exhaust heat can then be recaptured and used to heat air transferred to your air vents.
  • Two Stage Gas Valves – With a two stage gas valve, your furnace can respond to the temperature outside. There isn’t just one “on” switch. The furnace will regulate gas flow based on how much energy is needed to produce heat for your home. So, if there is a sudden burst of cold outside, the furnace will respond accordingly, but for most days when heating needs are low, it will use only the minimum amount of needed gas.
  • Programmable – High efficiency furnaces are now programmable, meaning you can set specific time limits for operation, change thermostat settings digitally and inspect the device through an electronic read out. The level of control given to you by a programmable high efficiency furnace can greatly reduce gas or electricity consumption.

Cost Benefit

The real reason many people are interested in high efficiency furnaces is that they are so much less expensive to operate. Instead of costing hundreds of dollars to run through the winter, they operate the bare minimum needed to heat your home. Using up to 95% of the fuel they consume to produce heat and regulating gas to cut how much is consumed during milder days, these furnaces are built to save you money.

If you have an old furnace that chews through energy like nobody’s business, now might be the time to consider the benefits of a brand new, high efficiency model.

Continue Reading

$300 Off Any Geothermal Heat Pump System

Friday, December 16th, 2011

Geothermal heating is a fantastic way to keep you home comfortable this winter. More and more homes are utilizing geothermal technology, not only because is it very energy efficient but it also costs very little to maintain. A geothermal heat pump uses the heat that naturally exists in the ground and utilizes it to raise the temperature of your home. Since no outside fuel, like gas or oil, is needed, there is very little cost to keep your system running. Carney Plumbing, Heating & Cooling employees geothermal installation experts; we can design and install the perfect geothermal system for your house. And right now we are offering a special deal – $300 off any Geothermal Heat Pump System! Now is the time to get a geothermal heating system installed in your house, it will help the environment and your wallet!

*Cannot be combined with other offers.

Continue Reading

Heating Guide: High Efficiency Furnaces and Chimney Concerns

Wednesday, December 14th, 2011

When upgrading to a high efficiency gas furnace in Telford, you may need to make some upgrades to your chimney. Older chimneys built for standard furnaces with normal exhaust needs are not built to the specifications needed by today’s high efficiency models. Not only is it unsafe to leave it as is, but the cost of repairs if you don’t have it upgraded can be substantial.

Down-Sizing

A common concern when upgrading to a high efficiency gas furnace is the issue of condensation and draft. Because the amount of exhaust being vented is reduced by a high efficiency furnace, your current setup is not sufficient for the new model. So, it needs to be reduced in size by a professional to avoid backup of exhaust. Proper chimney sizing is a complex process that requires professional guidelines and careful measurements of all appliances in your home.

Because the chimney often isn’t used at all for a high efficiency furnace (often PVC pipe used instead), the extra airflow in the chimney can become a major issue.

Chimney Condensation

The biggest concern for the chimney when changing the furnace efficiency is condensation. Specifically, acidic condensation droplets can build up in the chimney if not properly stopped. A new chimney liner must be placed in the chimney to avoid excessive corrosion due to the acid droplets. Keep in mind that the efficiency of your new furnace will determine whether you will use the traditional chimney for exhaust or if a new line will be installed to vent your furnace.

When to Take Action

If you have your furnace replaced, your technician will likely discuss the chimney situation in your home with you. Keep in mind that this might be necessary and that there might be an added cost involved because of it. Modern furnaces are not designed to accommodate aging chimneys and your safety and the integrity of your house are at risk if you don’t retrofit the chimney if necessary.

Continue Reading

Plumber Tip: How to Replace a Bathroom Vanity

Monday, December 12th, 2011

Because it looks something like a dresser combined with a kitchen counter, you may think of your Jamison home’s bathroom vanity as being a piece of furniture, and therefore that it is simple to replace. Well, there’s good news and bad news there.

The bad news is that because of the sinks and pipes involved, your vanity is part of your plumbing system, so it’s a little trickier than getting a new sofa.

The good news is that it is still something you can do on your own – or at least with a friend – in a few hours or so. After you have measured the space and purchased the new vanity, here is how you can go about replacing the old one:

  1. Shut off the water supply. This is always the first step when undertaking any sort of plumbing work. Put a bucket beneath the sink to catch any water that drips from the supply lines after you disconnect them.
  2. Using a putty or utility knife, loosen the caulk that is sealing the countertop. Gently remove the countertop.
  3. Detach the vanity from the wall. Most vanity units are screwed in place to the wall, so just spot and remove all the screws.
  4. Mark the studs in preparation for positioning the new vanity. Hint: the old one was already drilled into the studs, if it was done properly.
  5. Put the new vanity in place, making sure it is flush to the wall.
  6. Attach the new vanity to the wall, taking care to screw into the wall studs that you marked in step #4.
  7. Put a bead of caulk along the top of the vanity base to hold the countertop in place. Carefully set in the new countertop.
  8. Reconnect the plumbing that you disconnected as part of step #1.
  9. Put down a thin bead of caulk along the edges of the countertop below the lip. Smooth the caulk in place with a damp rag.

Now your new vanity is all set. Allow the caulk to dry before getting moisture near it, and don’t forget to turn the water supply back on! And if you need any help, talk to your local plumber.

Continue Reading