Carney All Seasons Blog: Archive for September, 2014

When is the Right Time for a Heating System Tune Up?

Monday, September 29th, 2014

Preventative maintenance is always faster, cheaper, and more convenient than replacing or repairing an entire broken system. That is why it is so important to have regular maintenance done on your heating system. The recommendation is that you get your heating system tuned up at least once a year. What is the best time to actually get it done, though? Read on for the benefits of getting your maintenance done during the fall season.

Timing

Fall is the ideal time to have your heating system checked for a number of reasons, timing being foremost among them. Any system is most susceptible to breakdowns during periods of heavy use. Therefore, it is prudent to have your heating system checked right before you plan on using it regularly. Since your need for heat will likely be greatest during winter, it is best to have a tune up shortly before the winter months begin.

Convenience

The benefit of convenience flows directly from the above point on timing. Inevitably, there will be many people who fail to get their heating system tune up before winter. When their heating system begins to have problems, the demand on service professionals in the area will spike. As you can probably imagine, this slows down the rate of service significantly.

If you wait until your heating system begins to have problems, you won’t just have to deal with not having heat during the cold season. You will also be competing for attention with all the other people who are having similar problems. Getting your heating system tuned up in the fall prevents this whole mess from happening.

Efficiency

Of course, you don’t have to wait to get your heating system checked in the fall. In fact, we highly recommend that you have your system checked as soon as possible if you haven’t already done it this year. However, the earlier in the year you have maintenance conducted, the greater length of time between having your heating system in top condition and putting it under heavy use. The closer your heating system tune up is to winter, the more you can be certain that your heating system is ready to face the cold season.

If you have not scheduled a heating system tune up, call Carney Plumbing Heating & Cooling. We’ll make sure that your heating system runs smoothly all winter long.

Continue Reading

3 Benefits of Heating Maintenance

Wednesday, September 24th, 2014

No one wants to think about preparing for winter, but it is coming. With the Fall Equinox passed, winter will be here before we know it, and with it, your need for heating. No one likes to experience that first flick of the heating switch and hear nothing, and one of the best ways to prevent this from happening is by scheduling heating maintenance in Doylestown. Since 1976, Carney Plumbing, Heating & Cooling has helped our customers stay comfortable through the cold Pennsylvania winters, so call us for a maintenance appointment today.

Why Schedule Maintenance?

There are 3 key things that happen during a maintenance appointment:

  • Inspection
  • Cleaning
  • Adjusting

During a maintenance appointment, your entire system is thoroughly inspected so that any existing or developing problems can be detected. Once the system is inspected, the different components are cleaned. Dirt and dust can build up on a system, and a system that is dirty simply doesn’t run as well as it should. Removing this dirt and dust allows the system to operate as it should. Lastly, there are components that may need adjusting and tightening, and your technician will handle this during the appointment.

So what are some of the benefits of scheduling maintenance? Here are a few:

  • Better performance – a clean, lubricated system runs much better than a dirty, worn one. This helps reduce energy usage.
  • Better comfort – when a system doesn’t run well, it doesn’t heat well. By doing the proper maintenance, you help your heating system work as it’s supposed to, which means it will heat as it’s supposed to.
  • Helps extend life of the system – allowing your system to operate while it’s dirty and not well-maintained contributes greatly to premature aging. No one wants to replace their furnace earlier than expected, and maintenance can help you avoid this scenario.

Maintenance can sometimes be underrated, but the truth is, it really does make a difference to the operation and life of your system.

If it’s been more than a year since your last heating maintenance appointment in Doylestown, call Carney Plumbing, Heating & Cooling today and speak with one of our trained specialists.

Continue Reading

What is Involved in Replacing an Old System?

Monday, September 22nd, 2014

No heating system can last forever, and if your unit has been in your home for many years, it may be nearing the end of its life. Whether rust and corrosion has rendered your current unit unusable, or if you simply want to find a more efficient furnace, boiler, or heat pump, professional heating system replacement is the right choice for you. In this guide, we’ll go over a few of the steps of replacing an older system and why it’s important to choose a company with experience selecting and replacing heaters.

Choosing a New System

The first step of heating replacement is choosing a new system. This is probably not a task you can take on by yourself. Technicians stay up to date on the latest technology, as well as which types of systems are most efficient. A specialist will be better at calculating which type of system uses more fuel as well as the lifespan of your new unit, which can help you decide on a heater that won’t break your budget as time goes on.

Sizing Your Unit

A technician must also determine which size unit is right for your home. This usually requires making careful calculations to account for the various rooms in your home as well as some other factors such as architectural design and insulation. With a heat pump, the technician must also account for cooling capacity. Undersized systems simply will not get the job done, while oversized units will be more costly, and may cost more to operate and have a shorter lifespan.

Installation

Of course, the final step of heating system replacement is installation. This is where you’ll want to make sure you’ve chosen the right technicians for the job. The installation process ensures that your unit is as efficient as possible. And improper installation means you may need repairs early on. Look for a company that offers warranties and optional maintenance coverage for your new system.

Carney Plumbing Heating & Cooling has been repairing, maintaining, and replacing heating systems for over 30 years.

Don’t trust just any company for your major heating decision. For heating system replacement in Norristown, call our dedicated staff of trained technicians today.

Continue Reading

How Effective is Geothermal Cooling?

Monday, September 15th, 2014

Geothermal cooling is relatively new to the residential cooling and heating market, but the science behind it has been around for decades. Geothermal systems are very effective in two important ways: first, they are very energy efficient and second, they are excellent at providing comfortable cooling and heating for your home. If you are considering geothermal cooling in Warminster, but have some questions about how the system will work, call the experts who can help: Carney Plumbing, Heating & Cooling.

Effective Cooling

A geothermal system is very effective at cooling your home for a couple of reasons. First, the system uses a heat pump, which transfers the heat and humidity from your home and transfers it into the ground where the loop resides. The cooling is a constant, low level disbursement of air that creates a nice, even temperature throughout your living spaces. Second, geothermal systems typically dehumidify the air up to 30% more than traditional air conditioners, naturally balancing the moisture levels in your home.

Highly Effective for Energy Efficiency

There are several reasons a geothermal system is so effective at being energy efficient. First, the system doesn’t use any fossil fuels at all. Second, the heat pump for the geothermal system uses very little electricity to run. Third, a geothermal system uses a source for energy that isn’t just renewable, it’s nonstop: the constant, steady temperature of the Earth just below the frost line. This resource will never run out, making it beyond sustainable. Fourth, the savings you will realize over time due to the energy efficiency of the system is significant: a reduction up to 60-70% of annual cooling and heating costs. These are the main reasons why geothermal systems are so effective in significantly increasing your energy efficiency and decreasing your carbon footprint.

Geothermal systems are incredibly energy efficient, and with average life spans of 25-50 years, they are also incredibly durable.

If you think geothermal cooling in Warminster may be the right choice for your home, call Carney Plumbing, Heating & Cooling today and schedule an appointment with one of our experts.

Continue Reading

How Do Storage Tank Water Heaters Work?

Monday, September 8th, 2014

As water flows from the water main to your home through a series of pipes, it’s usually much cooler than what you’d expect from a hot shower. The water heater, then, is an important asset to your home which is vital for many everyday activities around the home. And while there are a few different types of units available today, the storage tank water heater remains the most common type of unit used in homes. Yet many homeowners are unsure of how these systems heat water. Why is the tank so large? How does hot water enter the faucet? To answer these questions, we’ve put together this short guide to hot water heaters.

There are two types of systems that use different heating elements to heat the water: gas and electric. While these systems may look large and complex, they actually rely on a natural process of heat exchange in order to keep water heated. First, cold water enters the tank through a large pipe that leads all the way to the bottom. Here there may be a burner located underneath the tank, or an electric heating element may be located toward the bottom. Here’s where science takes over; hot water naturally rises above the cooler denser water. Another small pipe is located towards the top of the tank. This pipe picks up the heated water and carries it to the faucet. Water continues to re-enter the tank in order to keep a large supply of hot water on hand.

A few more key elements of hot water heaters help keep everything in working order. For example, a thermostat helps monitor the temperature while a pressure valve keeps the water pressure at a safe level. One problem you’ll want to avoid at all costs is rust, but the anode rod can prevent rust from damaging your system, increasing its lifespan. When rust damages the storage tank of your unit, you’ll likely need to replace your water heater. The anode rod attracts corrosive elements that may cause your unit to rust through, so it’s important to replace this rod when it becomes too worn down.

If you’re not sure whether you want a gas or electric water heater, or if you want to talk to an expert about hot water heaters in Lansdale, call the experts at Carney Plumbing Heating & Cooling today!

Continue Reading

The Fashion of Wearing White and Labor Day

Monday, September 1st, 2014

You may have heard about the fashion faux pas of wearing white after Labor Day. In the present, this tradition is usually treated as old fashioned and a joke. Few people will criticize you for wearing white articles of clothing after the first Monday in September, or even take notice of it except to wonder why it was ever a major concern at all.

Where did this tradition of white clothing going out of fashion after Labor Day come from, and why did it fade away like colorful fabric washed in a hot load in the washing machine?

In general, white makes sense for the heat of summer. Light-colored clothing reflects away the radiant heat of the sun, instead of absorbing it the way dark colors do, so for thousands of years of human history people have preferred to wear white clothing during the hotter months.

However, the idea of white as strictly fashionable during the summer season only emerged in the nineteenth and early twentieth centuries—the time when the very concept of “fashion” began to spread across the Western Hemisphere.

It was only the highest level of post-Civil War society in the U.S. that strict and often bizarre rules for fashion controlled whether someone was in with the “in” crowd. Compared to our ideas of what’s fashionable today, the Czars of Style in the 1880s were true despots. Things as trivial as sleeve length could determine whether a woman in high society—no matter her level of wealth—was fashionable or a pariah.

Wearing white during the only summer, when it was common for weddings and outdoor parties, was only of these restrictive society rules. When the U.S. government made Labor Day a federal holiday in 1894, the Fashion Czars gained a definite cut-off point for when wearing white was no longer “acceptable” in the upper echelons of wealthy society.

For many decades, this rule only applied to a small number of millionaire socialites in a few big cities, but in the 1950s it reached general fashion magazines that were read around the country and started to affect more people.

But time eventually broke apart this odd rule, and during the 1970s fashion became more individual. Some fashion legends, like Coco Chanel, also purposely rejected the restriction and wore white throughout the year. Today, the “no white after Labor Day rule” is little more than an amusing gag to tease friends, and almost nobody takes it seriously.

Whatever you choose to wear after Labor Day (and if it’s white, we won’t tease!), everyone here at Carney Plumbing, Heating & Cooling hopes you have a happy end of the summer and great plans for the fall!

Continue Reading