Carney All Seasons Blog: Archive for January, 2011

How a Circulating Fan Can Save You Money and Help Your AC Keep You Cool

Monday, January 31st, 2011

If you already have a central air conditioning unit, you probably have not though much about having some ceiling fans put in as well. After all, why would you need a fan when your air conditioner can keep you as cool as you want all year long?

Well, the truth is that a ceiling fan can actually contribute a lot to your household even when you do already have the central air in place. It can also save you quite a bit of money when it comes to your monthly cooling costs, so there is really no reason not to look into getting a ceiling fan of your own.

Certainly the air that air conditioners distribute throughout your house is quite cool. But a ceiling fan will help to circulate it much more effectively. In fact, a good ceiling fan can make a room feel up to eight degrees cooler than it actually is just because of the cooling affect that moving air has on your body.

This means that you could set the thermostat on your air conditioner higher and still enjoy the same level of comfort that you are used to. You may already know that for every degree you raise your thermostat in the summer you will be saving up to 3% off of your regular energy bill. So if you can turn the air conditioning down by more than five degrees, you will surely be seeing some substantial savings.

Of course, you are still running the ceiling fan in place of the air conditioner, but the fan will use only a very small fraction of the energy that the air conditioner does. This all means that having a ceiling fan and using it wisely can help you cut your annual cooling costs dramatically.

And a ceiling fan will be useful in the winter as well. Since heat rises, you can turn your fan on backwards and it will push the heat that has risen to the top of your room back out along the walls and down. This means that you will be getting more for the heat you are paying for as well, making the ceiling fan a great money saver all year long.

Continue Reading

WaterSense Labels

Friday, January 28th, 2011

Many people know about the EPA’s EnergyStar certification, which is a third-party certification system that verifies manufacturers’ claims about the energy efficiency of home appliances. The EnergyStar label has helped hundreds of thousands of consumers choose high-efficiency, cost-effective appliances for their homes.

The EPA has also developed a certification for plumbing fixtures, called WaterSense. WaterSense labels can be found on a variety of products, including:

  • Bathroom sink faucets and accessories
  • Showerheads
  • Toilets

While there are specific guidelines for each category of plumbing fixture, in general, the WaterSense label indicates that the product is at least 20% more efficient than conventional products in its category, without sacrificing performance or comfort.

The goal of the WaterSense guidelines is to make a real difference in the amount of water consumed in the U.S. – and the numbers bear this out. Let’s take a look at what would happen if every household in the US installed WaterSense products in their bathrooms.

If every household in the U.S. installed WaterSense bathroom sink faucets, it would save 60 billion gallons of water and $600 million in water heating costs. If every U.S. household put in WaterSense showerheads, the US would use 250 fewer billion gallons of water annually and save $2.5 billion in water heating costs. And if every household in the US upgraded to a new, efficient WaterSense toilet, it would save 640 billion gallons of water a year.

More realistically, even if only 1 in 10 U.S. households upgraded to WaterSense products, we would save about 74 billion gallons of water a year and $1.5 billion on our water heating bills.

Like EPA EnergyStar products, WaterSense products can be found at most plumbing retailers.

The WaterSense label can also be applied to entire homes. Homes that have the WaterSense label have:

  • Efficient hot water systems that deliver hot water quickly to minimize waste and waiting
  • WaterSense plumbing fixtures
  • EnergyStar dishwashers and clothes washers
  • Regionally appropriate outdoor landscaping that requires minimal maintenance and watering

In addition, landscaping professionals can apply for WaterSense certification to show that they have training in water-efficient irrigation system design, installation, maintenance, and auditing.

Continue Reading

Effects of Excessive Snow on Heat Pumps

Thursday, January 27th, 2011

Due to recent excessive snowfall, we wanted to pass along a few tips for our customers who own heat pump systems.

Heat Pumps and Snow

Excessive snow can reduce a heat pump’s ability to heat your home.

1. Heat pumps draw air from the areas surrounding them (all four sides of the outdoor unit). It is important to clear these areas of snow and ice build up in order to allow air to freely reach the heat pump. This will allow the heat pump to operate as efficiently as possible and will alleviate strain on the heat pump.

2. If possible, the space (air gap) between the heat pump and the plastic or concrete pad that the unit itself sits on should be cleared of snow to allow for drainage. Customers who have had heat pumps installed by Carney will note that there are two concrete lentels (rectangular blocks of concrete) that sit on either side of the base of the heat pump. The area between those lentils is the area that should be cleared.

3. Generally speaking, most heat pumps discharge air in an upward direction from the top of the unit. It is important to make sure that this area is clear of snow and ice to allow air to easily discharge (this is the air that is being drawn from the sides of the unit noted in item #1).

A note to Carney customers for whom we have installed a Trane XLi heat pump system: Trane’s XLi series heat pumps employ a “Weathergaurd” top that is designed to protect the heat pump from the affects of snow and ice on the top of the unit. In most cases snow and ice on the top of the unit will have no impact on an XLi heat pump. Air is discharged from the sides of the upper part of the heat pump instead. This area can be distinguished from the intake area as it is a) darker in color, b) plastic as opposed to steel, c) has a wider air gap between the fins and d) the direction of the louvers points upwards at an approximate 45 degree angle as opposed to downwards at the steel louvers. We have installed several hundred of Trane’s XLi series heat pump each year since 2003, so there is a good chance that you may own one – which is very beneficial at this time!

4. DO NOT attempt to forcefully remove ice build up from any part of the heat pump. If you cannot remove snow or ice easily with a broom or brush, do not try to pry or chisel ice from the unit. Doing so could cause severe or irrepairable damage to the heat pump.

5. If your heat pump is located in an area that is subject to exposure to melting snow and ice (such as underneath an overhang or gutter that may be frozen), check the unit repeatedly to ensure that ice has not built up inside the heat pump.

6. If you cannot clear the heat pump of snow and ice for any reason, switch the system to “Emergency Heat” at the thermostat. This will turn the heat pump off and engage electric resistance heaters that are located inside in order to provide heat for your home. This is a more expensive mode of operation for a heat pump system, so we do not advise continuing in this mode for more than a few days. If at that time, the snow and ice around the heat pump has not melted, feel free to schedule a service call with Carney and a technician from our service team will be happy to assist you.

Finally, if you are a geothermal heat pump owner – you have nothing to worry about! There is no outdoor unit, so there is no concern of snow or ice!

Further heating information can be found on our Heating FAQ’s Page.
As always, feel free to contact us with any questions or concerns at 215.346.7160 .

Continue Reading

Water-Saving Tips and Tricks

Wednesday, January 26th, 2011

Here are some of our favorite water-saving tips. They are easy to incorporate into your lifestyle – and can save you hundreds or even thousands of gallons of water a year.

Whole House

  • Check for leaks – you may save thousands of gallons a month! You can find leaks by looking, listening, and monitoring your water bill for unusually high usage. To check for toilet leaks, put food coloring in your tank. If it gets into the bowl without flushing, you have a leak. Don’t forget to look for leaks in your outdoor plumbing too.
  • Know where your master water shut-off valve is located. In the event of a major problem, you’ll save thousands of gallons of water – and maybe your possessions as well.

Outdoors

  • Adjust your sprinklers so that you water only your lawn – not your sidewalk or driveway.
  • Consider adding a patio or “outdoor room” to your home. You’ll have less lawn to water and will add thousands of dollars to your home’s value.
  • Do two chores at once – water the grass by washing your car or your pet on the lawn. Be sure to use natural, biodegradable soaps.
  • Have your plumber re-route your laundry waste water to your lawn (check with local authorities first to be sure this is legal in your town).

In the Bathroom

  • Turn off faucets when you’re not actively using water – such as when you’re lathering your hands, shaving, or brushing your teeth. You’ll save hundreds of gallons each month. New touchless water faucets (or very affordable converters for your existing faucet) make this easy and fun to do, especially for kids.
  • Shorten your shower by only a minute or two, and save 150 gallons of water a month. (You can do this by turning off the shower while you lather your hair.)
  • Replace your old showerhead with a new WaterSense water-saving showerhead. They’re inexpensive and easy to install. You’ll save up to 750 gallons a month (and it’s a great opportunity to get a nice style upgrade too!).
  • Install WaterSense-certified aerators on all your faucets – another inexpensive upgrade that can save hundreds of gallons a month.
  • Insulate hot water pipes so don’t have to run the water as long while you wait for it to heat up.
  • Plug the tub before turning the water on for your bath, then adjust the temperature as the tub fills up.
  • Keep a bucket in the shower to catch water as it heats up. Use this water to flush toilets or water plants.

In the Kitchen and Laundry Room

  • Install a tankless water heater near your kitchen sink so you don’t have to run the water while it warms up.
  • If your dishwasher is new, scrape off excess food, but don’t pre-rinse. Modern dishwashers are built to handle un-rinsed items.
  • Upgrade your old water-cooled refrigerator, air conditioner, or ice-maker to a new air-cooled model for a significant reduction in water use
  • When buying new appliances, look for the EnergyStar label, which guarantees high efficiency. Also, look for models that offer cycle and load size adjustments.
  • Run your dishwasher and clothes washer only when they are full – you can save up to 1,000 gallons a month.

Continue Reading

Green Your Plumbing

Monday, January 24th, 2011

These days, “green plumbing” is getting increasing attention, especially in dry areas like the southwestern US.

“Green plumbing” helps the environment by doing one or more of the following:

  • Saving water
  • Saving energy
  • Using environmentally-friendly materials

There are a wide range of green plumbing products that can make a big difference in how much water and energy your home uses. They range from simple accessories that cost less than $20 to major home remodels. Here are a few of them, ranging from the simple and immediate to larger investments with a longer-term payback.

  • Low-flow showerheads and faucet accessories (often called “aerators”). Check the side of your current faucet and showerhead to see if they use more than 1.5 GPM and 2.0 GPM, respectively. If they do, you can benefit from an upgrade. Look for the EPA WaterSense label to be sure that your new showerheads and faucet accessories are water-efficient.
  • Hot water heater blankets and pipe insulation.You don’t need to insulate your hot water heater and  pipes to prevent freezing, but doing it will save money, water, and energy, and (as a bonus) you’ll enjoy hotter showers in the winter. This is a simple DIY job and the materials are extremely affordable.
  • Touch-free faucets. When you’re not actively using them, touch-free faucets shut off. According to industry estimates, the result can be a water savings of up to 70%. Touch-free faucet technology has improved greatly in recent years, and sensors are now very reliable. If you like your current faucet and want to keep it, there are also touch-free faucet conversion kits.
  • Dual-flush toilets. As the name suggests, these toilets have two different flushes: a “half-flush” for liquid waste, and a “full flush” for solids. Dual-flush toilets are standard in many European countries and are becoming increasingly popular in the U.S. because of their water-saving potential (up to 68% over conventional toilets) and sleek styling.
  • Tankless water heaters. Unlike conventional tank heaters, which use energy constantly to maintain a reserve supply of hot water, tankless heaters only use energy when hot water is needed.  Tankless water heaters are not quite “instantaneous”, as some manufacturers claim, but they provide hot water within a few seconds. Good quality heaters can provide hot water to multiple fixtures simultaneously.
  • Sprinkler system upgrades. Much of the water from spray sprinkler systems evaporates. Trickle and drip irrigation systems can improve water efficiency by delivering smaller amounts of water directly to the base of the plant. Other products, such as pressure regulating spray heads and rotors and automatic rain sensors, can also save thousands of gallons a year. Another option is to re-use laundry waste water by diverting it into the garden. This can be a DIY project or can be built directly into your plumbing. Check with your local authorities to find out if this is permitted in your area.

Continue Reading

The Beauty of Zone Heating

Friday, January 21st, 2011

While it might not technically be a necessity, there are a lot of reasons why you might want to look into having a zone heating system installed in your home. Whether you’ve been using the same home heating system for a long time or are looking to have a new one installed, there’s never a bad time to have a zone heating system put in.

Most people think that the only thing that affects their home heating and cooling bills is the energy efficiency of their furnace or heat pump. However, that’s simply not always the case. Certainly, the more efficient your furnace or heat pump is, the lower your energy bills will be. But that doesn’t mean they’re as low as they could possibly be.

After all, if you don’t have a zone control system installed, you’re paying to heat your entire house every time you turn on the heat. Depending on the size of your house, that could mean you’re heating anywhere from two to 10 rooms or more that are unoccupied at the time. In fact, you could be paying to heat an entire empty wing of your home. And while you’ll pay less than you would if your heating system was less efficient, you’re still paying more than you need to.

With a zone control system, you can heat your home much more efficiently because you can control which areas of the house get the heat and which ones don’t. You can set multiple different temperatures for the different zones of your home, which allows you to keep the occupied areas warm while not forcing you to waste energy to heat unoccupied spaces.

Aside from the economic benefits of only heating the areas of your home that you need, zone control systems also can put an end to some of those contentious thermostat wars that go on in so many households. If the members of your household can never agree on what a comfortable temperature is, they can simply each set their own temperature for their own area of the house.

That way, everyone is happy and no one has to suffer uncomfortably. After all, you paid a lot for your state of the art home heating system. It’s only fitting that you should be able to get the most possible out of it.

Continue Reading

Furnace vs. Heat Pump

Wednesday, January 19th, 2011

If you’re preparing to replace your existing heating system, you may very well be struggling with the question of whether to go with a furnace or a heat pump for all of your future home heating needs. Each of these systems have their own advantages and drawbacks, and once you’ve narrowed it down to one type or the other, you’ll still have a pretty wide variety of products to choose from.

Furnaces are still the most popular type of home heating equipment on the market. You can get furnaces that run on gas, oil or electricity, although gas furnaces are by far the most common type of furnace around these days. The latest models are extremely energy efficient, with AFUE ratings reaching into the high 90%s.

Like heat pumps, furnaces use ducts to transfer heated air throughout your home. They typically require regular maintenance once every year or two depending on the type of furnace you have, and they can be expected to last anywhere from 15 to 25 years when properly maintained. Most modern furnaces are also made to be compatible with a central air conditioning or cooling system as well.

Heat pumps, on the other hand, don’t generate the heat that they circulate throughout your house. Instead they are able to extract the heat from the air outside and pump it inside. This means that they use much less energy than even the most energy efficient furnaces.

However, heat pumps are only capable of heating your house comfortably when the outside temperature is above freezing. If you live in an area with particularly long and frigid winters, you’ll probably find that you need to supplement your heat pump with another heat source. Because of this, it actually makes little sense to use a heat pump in more extreme climates.

On the other hand, if you live in an area with relatively mild winters, heat pumps can be a great option. They provide a constant flow of warm air to all parts of your home and can also keep you house cool during hot summer months. To cool your home, heat pumps simply reverse the process they use to warm it. They take the heat out of your indoor air and pump it outside. This is a very effective home cooling method and makes heat pumps a great solution for year round comfort.

Continue Reading

Saving Money by Heating the Crawl Space

Monday, January 17th, 2011

If you’re like most people, you probably focus on how to keep the living areas of your home warm and comfortable in the winter months. Of course, you want to do this with as little expense as possible and so insulating and heating all of the rooms of your home naturally makes sense. The main goal of this is to eliminate any areas where heat might be able to escape, thereby causing you to spend more and run your heating system for longer to keep the temperature indoors at an acceptable level.

What you might not often think about, however, is the fact that the crawlspace under your floors is probably not insulted at all. Of course you and your family don’t spend much time there, but if you’re trying to keep your home comfortable for as small a price tag as possible, this is something you should think about addressing.

There are actually several reasons that heating and insulating your crawlspace can save you money in the long run. For one thing, the ducts and pipes that carry your heated air and water to various locations throughout your house generally run right through these very crawl spaces. Even with an average amount of insulation surrounding those pipes and ducts, you’ll still be losing heat to the outdoors as the air and water travel through the crawl space.

Of course, pumping heat directly into the crawl space would be a waste too, since there is no insulation to keep it there. With the proper amount of insulation, however, you can easily heat your crawl space with very little energy and potentially save a ton in the long run.

When your ducts and pipes are traveling through a heated space, they’ll retain the heat they started with and bring that to the rest of your home. You’ll pay very little to keep the crawl space warm and you’ll save a lot by conserving the heat and hot water that you do generate to keep your house comfortable.

Plus, because your crawl space is generally located directly underneath the floor, you’ll be protecting the actual rooms of your home from heat loss as well. And you floors won’t be so cold to walk on either. Overall, there really is no reason not to take the time and have your crawl space properly insulated and heated.

Continue Reading

The Energy Star Label

Friday, January 14th, 2011

The Energy Star program is a joint program of the US environmental protection agency and the US department of Energy. The program’s goal is to help consumers save money and protect the environment through energy-efficient products and practices.

The best-known aspect of the Energy Star program is the Energy Star label, which is awarded to appliances and other items that are significantly more efficient than average. Energy Star efficiency guidelines vary depending on product category, but in general, Energy Star products use 20%-30% less energy than minimum federal standards.

The Energy Star guidelines were designed both with energy efficiency and performance in mind. While low energy use is one of the most important criteria for selecting Energy Star appliances, product performance, features, warranty, safety, and durability are also taken into account. Price is also a factor: if a product costs significantly more than other products in its category, it will only receive the Energy Star label if the up-front cost will be recovered through savings in operating costs within a reasonable amount of time.

The first Energy Star labels were given to computers and monitors in 1992. Now labels can be found on many other products, including:

  • Furnaces
  • Hot water heaters
  • Air conditioners
  • Dishwashers
  • Refrigerators
  • Light bulbs (florescent and LED)
  • TVs

Energy Star products can be found wherever appliances and electronics are sold. Look for the blue and white Energy Star label. You can also look for the yellow EnergyGuide label that is affixed to most heating and cooling systems and household appliances. This label is created by the Department of Energy and shows a product’s annual cost of operation compared to similar models. It will often indicate whether a product is Energy Star.

It’s important to note that while an Energy Star label indicates that a heater, air conditioner, or household appliance is more efficient than the minimum guidelines, it does not always mean that you are getting the most energy efficient option on the market. If you are making a major appliance purchase, use the Energy Star label to be sure every model on your “short list” is energy efficient. Then, look carefully at the EnergyGuide label to compare the efficiency of the models you are considering.

The EPA has also extended the Energy Star label to cover new homes and commercial and industrial buildings. To qualify for the Energy Star rating, a new home must use at least 15% less energy than standard homes (built to the 2004 International Residential Code). Energy Star homes usually include insulation, high-performance windows, energy-efficient heating and cooling systems, appliances, lighting, and water heaters.

The Energy Star standards and label have been recognized in many other countries, including Canada, Australia, Japan, New Zealand, Taiwan and the European Union.

Continue Reading

Attic Insulation – Does it Save You Money?

Wednesday, January 12th, 2011

While you may not spend too much time up in your attic in the winter – or at any time of year for that matter – the conditions up there can end up having a significant impact on the size of your heating bills. Fortunately, if you’re leaking heat out of your attic like crazy, there is something you can do about it. And it won’t even take you a lot of time or cost too much, but it will save you a ton of money in the long run.

So what is it that you can do to magically save so much on your heating bills? Well, the truth is that all you really need to do is insulate your attic properly. Since the attic isn’t typically a space that people occupy often, builders often leave these areas uninsulated. That means that they’re pretty cold in the winter. But if you’re not sitting up there, does it really make any difference?

Absolutely it does. The problem with having an uninsulated attic is that heat rises and so will quickly move to the highest point in your home. This is the attic, of course, and if the attic isn’t insulated, all of that warm air that you’ve been paying to heat will go right out the top of your house. Even if the door to the attic is shut up tight, you will still be losing heat into it.

And if the attic isn’t insulated, chances are that there’s no insulation anywhere above the ceiling of the top floor of your house. With heat continually rising and escaping out of the top of your home, you’ll find that your home heating system has to work much harder to keep the house at a comfortable temperature. And the harder your heating system works, the more you’re paying in energy bills each month.

Fortunately, adding insulation to your attic is relatively easy and won’t cost you much at all. And the savings you start to see immediately on your energy bills will more than make up for the expense of having the insulation installed. Even if your attic does have some insulation in place already, it may be worth checking to make sure it’s still working well. Some types of insulation simply break down over time and you might not be getting anywhere near the protection you thought you were.

Continue Reading