Archive for the ‘Energy Savings’ Category

« Older Entries
Newer Entries »

Effects of Excessive Snow on Heat Pumps

Thursday, January 27th, 2011

215.346.7160

Due to recent excessive snowfall, we wanted to pass along a few tips for our customers who own heat pump systems.

Heat Pumps and Snow

Excessive snow can reduce a heat pump's ability to heat your home.

1. Heat pumps draw air from the areas surrounding them (all four sides of the outdoor unit). It is important to clear these areas of snow and ice build up in order to allow air to freely reach the heat pump. This will allow the heat pump to operate as efficiently as possible and will alleviate strain on the heat pump.

2. If possible, the space (air gap) between the heat pump and the plastic or concrete pad that the unit itself sits on should be cleared of snow to allow for drainage. Customers who have had heat pumps installed by Carney will note that there are two concrete lentels (rectangular blocks of concrete) that sit on either side of the base of the heat pump. The area between those lentils is the area that should be cleared.

3. Generally speaking, most heat pumps discharge air in an upward direction from the top of the unit. It is important to make sure that this area is clear of snow and ice to allow air to easily discharge (this is the air that is being drawn from the sides of the unit noted in item #1).

A note to Carney customers for whom we have installed a Trane XLi heat pump system: Trane’s XLi series heat pumps employ a “Weathergaurd” top that is designed to protect the heat pump from the affects of snow and ice on the top of the unit. In most cases snow and ice on the top of the unit will have no impact on an XLi heat pump. Air is discharged from the sides of the upper part of the heat pump instead. This area can be distinguished from the intake area as it is a) darker in color, b) plastic as opposed to steel, c) has a wider air gap between the fins and d) the direction of the louvers points upwards at an approximate 45 degree angle as opposed to downwards at the steel louvers. We have installed several hundred of Trane’s XLi series heat pump each year since 2003, so there is a good chance that you may own one – which is very beneficial at this time!
To help you identify if you own a Trane XLi heat pump, the following link will take you to an image of a Trane XL20i, which employs the same “Weathergaurd” top found on Trane XL16i, XL15i, XL14i and XL13i. http://www.trane.com/Residential/Products/Heat-Pumps/XL20i-Heat-Pumps

4. DO NOT attempt to forcefully remove ice build up from any part of the heat pump. If you cannot remove snow or ice easily with a broom or brush, do not try to pry or chisel ice from the unit. Doing so could cause severe or irrepairable damage to the heat pump.

5. If your heat pump is located in an area that is subject to exposure to melting snow and ice (such as underneath an overhang or gutter that may be frozen), check the unit repeatedly to ensure that ice has not built up inside the heat pump.

6. If you cannot clear the heat pump of snow and ice for any reason, switch the system to “Emergency Heat” at the thermostat. This will turn the heat pump off and engage electric resistance heaters that are located inside in order to provide heat for your home. This is a more expensive mode of operation for a heat pump system, so we do not advise continuing in this mode for more than a few days. If at that time, the snow and ice around the heat pump has not melted, feel free to schedule a service call with Carney and a technician from our service team will be happy to assist you.

Finally, if you are a geothermal heat pump owner – you have nothing to worry about! There is no outdoor unit, so there is no concern of snow or ice!

Further heating information can be found on our Heating FAQ’s Page.
As always, feel free to contact us with any questions or concerns at 215.346.7160 .

Tags: , , , ,
Posted in Energy Savings, Heat Pump Systems, Heat Pumps, Heating, Trane | Comments Off

Water-Saving Tips and Tricks

Wednesday, January 26th, 2011

215.346.7160

Here are some of our favorite water-saving tips. They are easy to incorporate into your lifestyle – and can save you hundreds or even thousands of gallons of water a year.

Whole House

  • Check for leaks – you may save thousands of gallons a month! You can find leaks by looking, listening, and monitoring your water bill for unusually high usage. To check for toilet leaks, put food coloring in your tank. If it gets into the bowl without flushing, you have a leak. Don’t forget to look for leaks in your outdoor plumbing too.
  • Know where your master water shut-off valve is located. In the event of a major problem, you’ll save thousands of gallons of water – and maybe your possessions as well.

Outdoors

  • Adjust your sprinklers so that you water only your lawn – not your sidewalk or driveway.
  • Consider adding a patio or “outdoor room” to your home. You’ll have less lawn to water and will add thousands of dollars to your home’s value.
  • Do two chores at once – water the grass by washing your car or your pet on the lawn. Be sure to use natural, biodegradable soaps.
  • Have your plumber re-route your laundry waste water to your lawn (check with local authorities first to be sure this is legal in your town).

In the Bathroom

  • Turn off faucets when you’re not actively using water – such as when you’re lathering your hands, shaving, or brushing your teeth. You’ll save hundreds of gallons each month. New touchless water faucets (or very affordable converters for your existing faucet) make this easy and fun to do, especially for kids.
  • Shorten your shower by only a minute or two, and save 150 gallons of water a month. (You can do this by turning off the shower while you lather your hair.)
  • Replace your old showerhead with a new WaterSense water-saving showerhead. They’re inexpensive and easy to install. You’ll save up to 750 gallons a month (and it’s a great opportunity to get a nice style upgrade too!).
  • Install WaterSense-certified aerators on all your faucets – another inexpensive upgrade that can save hundreds of gallons a month.
  • Insulate hot water pipes so don’t have to run the water as long while you wait for it to heat up.
  • Plug the tub before turning the water on for your bath, then adjust the temperature as the tub fills up.
  • Keep a bucket in the shower to catch water as it heats up. Use this water to flush toilets or water plants.

In the Kitchen and Laundry Room

  • Install a tankless water heater near your kitchen sink so you don’t have to run the water while it warms up.
  • If your dishwasher is new, scrape off excess food, but don’t pre-rinse. Modern dishwashers are built to handle un-rinsed items.
  • Upgrade your old water-cooled refrigerator, air conditioner, or ice-maker to a new air-cooled model for a significant reduction in water use
  • When buying new appliances, look for the EnergyStar label, which guarantees high efficiency. Also, look for models that offer cycle and load size adjustments.
  • Run your dishwasher and clothes washer only when they are full – you can save up to 1,000 gallons a month.

Tags: , , , , , , ,
Posted in Energy Savings | Comments Off

The Beauty of Zone Heating

Friday, January 21st, 2011

215.346.7160

While it might not technically be a necessity, there are a lot of reasons why you might want to look into having a zone heating system installed in your home. Whether you’ve been using the same home heating system for a long time or are looking to have a new one installed, there’s never a bad time to have a zone heating system put in.

Most people think that the only thing that affects their home heating and cooling bills is the energy efficiency of their furnace or heat pump. However, that’s simply not always the case. Certainly, the more efficient your furnace or heat pump is, the lower your energy bills will be. But that doesn’t mean they’re as low as they could possibly be.

After all, if you don’t have a zone control system installed, you’re paying to heat your entire house every time you turn on the heat. Depending on the size of your house, that could mean you’re heating anywhere from two to 10 rooms or more that are unoccupied at the time. In fact, you could be paying to heat an entire empty wing of your home. And while you’ll pay less than you would if your heating system was less efficient, you’re still paying more than you need to.

With a zone control system, you can heat your home much more efficiently because you can control which areas of the house get the heat and which ones don’t. You can set multiple different temperatures for the different zones of your home, which allows you to keep the occupied areas warm while not forcing you to waste energy to heat unoccupied spaces.

Aside from the economic benefits of only heating the areas of your home that you need, zone control systems also can put an end to some of those contentious thermostat wars that go on in so many households. If the members of your household can never agree on what a comfortable temperature is, they can simply each set their own temperature for their own area of the house.

That way, everyone is happy and no one has to suffer uncomfortably. After all, you paid a lot for your state of the art home heating system. It’s only fitting that you should be able to get the most possible out of it.

Tags: , , , , , , ,
Posted in Energy Savings | Comments Off

Saving Money by Heating the Crawl Space

Monday, January 17th, 2011

215.346.7160

If you’re like most people, you probably focus on how to keep the living areas of your home warm and comfortable in the winter months. Of course, you want to do this with as little expense as possible and so insulating and heating all of the rooms of your home naturally makes sense. The main goal of this is to eliminate any areas where heat might be able to escape, thereby causing you to spend more and run your heating system for longer to keep the temperature indoors at an acceptable level.

What you might not often think about, however, is the fact that the crawlspace under your floors is probably not insulted at all. Of course you and your family don’t spend much time there, but if you’re trying to keep your home comfortable for as small a price tag as possible, this is something you should think about addressing.

There are actually several reasons that heating and insulating your crawlspace can save you money in the long run. For one thing, the ducts and pipes that carry your heated air and water to various locations throughout your house generally run right through these very crawl spaces. Even with an average amount of insulation surrounding those pipes and ducts, you’ll still be losing heat to the outdoors as the air and water travel through the crawl space.

Of course, pumping heat directly into the crawl space would be a waste too, since there is no insulation to keep it there. With the proper amount of insulation, however, you can easily heat your crawl space with very little energy and potentially save a ton in the long run.

When your ducts and pipes are traveling through a heated space, they’ll retain the heat they started with and bring that to the rest of your home. You’ll pay very little to keep the crawl space warm and you’ll save a lot by conserving the heat and hot water that you do generate to keep your house comfortable.

Plus, because your crawl space is generally located directly underneath the floor, you’ll be protecting the actual rooms of your home from heat loss as well. And you floors won’t be so cold to walk on either. Overall, there really is no reason not to take the time and have your crawl space properly insulated and heated.

Tags: , , , , , , ,
Posted in Energy Savings | Comments Off

The Energy Star Label

Friday, January 14th, 2011

215.346.7160

The Energy Star program is a joint program of the US environmental protection agency and the US department of Energy. The program’s goal is to help consumers save money and protect the environment through energy-efficient products and practices.

The best-known aspect of the Energy Star program is the Energy Star label, which is awarded to appliances and other items that are significantly more efficient than average. Energy Star efficiency guidelines vary depending on product category, but in general, Energy Star products use 20%-30% less energy than minimum federal standards.

The Energy Star guidelines were designed both with energy efficiency and performance in mind. While low energy use is one of the most important criteria for selecting Energy Star appliances, product performance, features, warranty, safety, and durability are also taken into account. Price is also a factor: if a product costs significantly more than other products in its category, it will only receive the Energy Star label if the up-front cost will be recovered through savings in operating costs within a reasonable amount of time.

The first Energy Star labels were given to computers and monitors in 1992. Now labels can be found on many other products, including:

  • Furnaces
  • Hot water heaters
  • Air conditioners
  • Dishwashers
  • Refrigerators
  • Light bulbs (florescent and LED)
  • TVs

Energy Star products can be found wherever appliances and electronics are sold. Look for the blue and white Energy Star label. You can also look for the yellow EnergyGuide label that is affixed to most heating and cooling systems and household appliances. This label is created by the Department of Energy and shows a product’s annual cost of operation compared to similar models. It will often indicate whether a product is Energy Star.

It’s important to note that while an Energy Star label indicates that a heater, air conditioner, or household appliance is more efficient than the minimum guidelines, it does not always mean that you are getting the most energy efficient option on the market. If you are making a major appliance purchase, use the Energy Star label to be sure every model on your “short list” is energy efficient. Then, look carefully at the EnergyGuide label to compare the efficiency of the models you are considering.

The EPA has also extended the Energy Star label to cover new homes and commercial and industrial buildings. To qualify for the Energy Star rating, a new home must use at least 15% less energy than standard homes (built to the 2004 International Residential Code). Energy Star homes usually include insulation, high-performance windows, energy-efficient heating and cooling systems, appliances, lighting, and water heaters.

The Energy Star standards and label have been recognized in many other countries, including Canada, Australia, Japan, New Zealand, Taiwan and the European Union.

Tags: , , , , , , ,
Posted in Energy Savings | Comments Off

Attic Insulation – Does it Save You Money?

Wednesday, January 12th, 2011

215.346.7160

While you may not spend too much time up in your attic in the winter – or at any time of year for that matter – the conditions up there can end up having a significant impact on the size of your heating bills. Fortunately, if you’re leaking heat out of your attic like crazy, there is something you can do about it. And it won’t even take you a lot of time or cost too much, but it will save you a ton of money in the long run.

So what is it that you can do to magically save so much on your heating bills? Well, the truth is that all you really need to do is insulate your attic properly. Since the attic isn’t typically a space that people occupy often, builders often leave these areas uninsulated. That means that they’re pretty cold in the winter. But if you’re not sitting up there, does it really make any difference?

Absolutely it does. The problem with having an uninsulated attic is that heat rises and so will quickly move to the highest point in your home. This is the attic, of course, and if the attic isn’t insulated, all of that warm air that you’ve been paying to heat will go right out the top of your house. Even if the door to the attic is shut up tight, you will still be losing heat into it.

And if the attic isn’t insulated, chances are that there’s no insulation anywhere above the ceiling of the top floor of your house. With heat continually rising and escaping out of the top of your home, you’ll find that your home heating system has to work much harder to keep the house at a comfortable temperature. And the harder your heating system works, the more you’re paying in energy bills each month.

Fortunately, adding insulation to your attic is relatively easy and won’t cost you much at all. And the savings you start to see immediately on your energy bills will more than make up for the expense of having the insulation installed. Even if your attic does have some insulation in place already, it may be worth checking to make sure it’s still working well. Some types of insulation simply break down over time and you might not be getting anywhere near the protection you thought you were.

Tags: , , , , , , , ,
Posted in Energy Savings | Comments Off

How Efficient Is a Heat Pump?

Thursday, January 6th, 2011

215.346.7160

Heat pumps are actually remarkably efficient when compared to some of the home heating alternatives out there. Especially if you’re already using electricity to heat your home, you can get generate huge savings on your monthly energy bills by switching to a heat pump system.

As their name suggests, heat pumps remove heat from the air and transfer that heat from one area to another. That means that in the winter, your heat pump will remove the heat from the air outside your home and pump that heat in to heat your home. During the summer months, that process is actually reversed, and heat pumps are able to cool your home by collecting the heat from your indoor air and pumping it outside.

Since heat pumps are actually just moving heat from one place to another rather than generating it all on their own, they don’t require much energy at all to operate. While you can buy furnaces that are as much as 97% energy efficient, they’re still using more energy than a heat pump would. The fact that the furnace is turning the vast majority of the energy that it uses into heat doesn’t mean that it still doesn’t require more energy to operate.

Just because heat pumps are more efficient than many other types of heating systems, you can’t just assume that all heat pumps are equally energy efficient. Just as different types and models of furnaces have different energy efficiency ratings, so too do the many types, sizes and models of heat pumps. Make sure you thoroughly compare your options before you settle on the right system for your home.

The energy efficiency rating of a furnace is easy to recognize, as each of them comes with a standard AFUE rating. If you’re looking to switch to heat pumps, however, it’s easy to get confused when you’re trying to compare the energy efficiency of various models.

Heat pumps actually have two separate measurements for energy efficiency. These are the seasonal energy efficiency ratio (SEER) and the heating seasonal performance factor (HSPF). Energy efficiency measurements for heat pumps reflect both the cooling and heating efficiency of the system, and so what’s best for you may vary depending on what you’re more likely to use your heat pump for.

Tags: , , , , , , ,
Posted in Energy Savings, Heat Pump Systems, Heat Pumps | Comments Off

Dear Santa, Please Bring Me Some New Plumbing Accessories (Really!!)

Wednesday, December 22nd, 2010

215.346.7160

When most people think of holiday gifts for their family, chances are they’re not considering…plumbing. But maybe it’s time to think again. Everyone uses toilets, sinks, and showers every day – which means that making improvements to your plumbing will make your entire family more comfortable, every day! The right plumbing upgrades can help your family enjoy mornings more, get fewer colds, savor great European style, and save money on utility bills (money that you can put towards that new car, or a dream vacation).

Plumbing upgrades are also a great green gift. They save water and energy, and they last for years – much better than cheap, disposable stuff that will just wind up in the landfill.

So, while we’re not necessarily recommending that you completely forget about jewelry, toys, and electronics, we do think you should consider adding plumbing improvements to your gift list.

Here are some suggestions for some great, relatively inexpensive plumbing improvements that your family will enjoy every day:

  • Insulate your hot water pipes, and put a blanket over your hot water heater. This is often touted as a money-saving measure (and it is) – but it has the wonderful side effect of making your water hotter as it comes out of your sink or shower. You can’t put this under the tree…but wouldn’t your family enjoy waking up to lovely warm showers on Christmas morning? This is a great gift if you’re strapped for cash, because the materials for insulating your pipes and heater are very inexpensive – the biggest part of the gift is a couple of hours of your time and effort. (Read our blog post on insulating your hot water pipes to find out how easy it is to do.) [Link to: http://www.milani.ca/blog/plumbing/prevent-frozen-pipes/]
  • Replace your old water-saving showerhead with one of the new-generation water-saving showerheads. Those old aerators were virtuous, but they can be chilly and a little prickly.  With the right new showerhead, you’ll never even know that you’re saving water – you’ll just feel like you’re in a luxury hotel. You can get a wide range of fun styles and functions, including rain showerheads, massage showerheads, you name it. (Pair a new showerhead with insulating your pipes to really kick your family’s shower experience up a notch!)

Tags: , , , , ,
Posted in Energy Savings, Green Living, Plumbing | Comments Off

Touch-Free Faucets: Green Plumbing That’s Fun and Easy!

Wednesday, December 8th, 2010

215.346.7160

One fun, high-tech, and relatively inexpensive way to go green is to install a touch-free faucet in your kitchen or bathroom. Touch-free faucets work on a very simple principle: when you’re not actively using them, they shut off. There are a lot of times when you leave a normal faucet on simply because your hands are full (i.e. when you’re washing something), or soapy. With a touch-free faucet, the water turns off during all these gaps in your actual water usage. According to industry estimates, the result can be a water savings of up to 70%.

Of course, most of us have encountered touch-free faucets in public restrooms, and they can be frustrating. You can end up waving your hands around wildly, hoping a faucet somewhere in the room will turn on, and then the water cuts off mid-stream, just when your hands are full of soap. However, new sensor technology is making touch-free faucets much easier to use. These sensors are “omni-directional”, meaning that when your hands are anywhere within a given radius around the tap, the water will turn on and stay on.

Top-of-the-line models can dispense filtered water for drinking, and one designer model has a digital LED screen that allows you to adjust the water temperature, fill a glass with drinking water, or dispense dishwashing detergent, soap, or even hand lotion – all by waving your hand in front of the desired function. Some models also have manual override, which enables you to push a button so that the faucet will stay on for a certain time period without shutting off, even if you move your hands away.

Alternatively, if you like your current faucet and want to keep it, you can add a touch-free faucet adaptor to your existing faucet. Adaptors start at about $50.

Touch-free faucets and adaptors are surprisingly easy to install – no more difficult than conventional faucets. They can be powered by an AC adaptor or batteries, so you can install them almost anywhere.

In addition to the water savings, there are other benefits to touch-free faucets as well:

  • Touch-free faucets are much easier to use than regular faucets – especially if your hands are dirty, soapy, or full.
  • Touch-free faucets are much more sanitary than conventional faucets. With conventional faucets, you turn them on with dirty hands, wash your hands carefully, and then immediately touch the dirty handles again to turn off the faucet.
  • Touch-free faucets allow you to set the water temperature precisely for improved comfort and safety.
  • Touch-free faucets are ADA compliant for people with disabilities.
  • Touch-free faucets are helpful for older people or small children who may forget to turn off the faucet when they are finished
  • Kids love touch-free faucets – no more arguments about hand-washing!

Touch-free faucets make your bathroom or kitchen look really cool and high-tech.

Tags: , ,
Posted in Energy Savings, Plumbing, Water Conservation | Comments Off

Heating system rebates up to $3,500 – now through December 31st!

Thursday, December 2nd, 2010

215.346.7160

Have you taken advantage of the Federal Tax Credit yet?  What are you waiting for?  This is the FINAL MONTH to save thousands of dollars when you replace your old, less efficient home heating system with a new, energy saving, high efficiency heater!  If you replace your natural gas, propane gas or oil heating system with a qualifying system by December 31st the Federal Government is providing a tax credit up to $1,500!*

The year-end incentives don’t stop there!  In addition to the tax credit, manufacturer rebates of up to $1,000 on new heating systems and air conditioning systems are available now through December 31st.  Combine these two incentives and you’re saving up to $2,500 by simply having Carney Plumbing, Heating and Cooling replace your old, less efficient heater and air conditioner with a new, energy saving system.

In addition to the money you’re saving through the rebate offers, modern high efficiency heating and air conditioning systems save hundreds of dollars each year in energy usage and come with FULL 10 YEAR PARTS & LABOR WARRANTIES.
Call us today at 215.346.7160 to schedule your FREE, in-home consultation!  Don’t forget- these rebates are only available until December 31st.

The rebates don’t stop there!  We would like to offer you even more savings!  Carney Plumbing, Heating and Cooling now has a coupon allowing for an instant $400 off of your purchase of a new heater and air conditioner!  Click here for the coupon!

Finally, utility providers such as PECO and PP&L are offering rebates up to $700 for high efficiency furnaces, heat pumps and air conditioners.

Families across Pennsylvania are taking advantage of the Rebate Programs.

As you can see, the savings really add up if you act now, but this opportunity will not last!  Don’t wait until after December 31st to have your new heating system installed, because missing this deadline will cost you savings of up to $3,500!!!  Call Carney today to schedule your FREE in-home consultation and take advantage of these unprecedented incentives before the year is over and these offers expire!

*Consult your tax preparer for personal eligibility concerning tax credit.

Tags: , , , , , , , , , , , , , ,
Posted in Air Conditioning, Air Conditioning Rebates, Energy Savings, Gas Heaters, Green Living, Heat Pump Systems, Heat Pumps, Heating, Oil Heaters, PECO Rebates, PP&L Rebates, Rebates & Tax Credits, Tax Credits | Comments »

« Older Entries
Newer Entries »