Carney All Seasons Blog: Archive for September, 2011

Plumbing Noises: Determining What They Mean

Friday, September 30th, 2011

Under ideal conditions, you would hear nothing from your Lansdale home’s plumbing system except the sound of running water when you turn on the tap. Unfortunately, that is not always what actually happens. In fact, your plumbing can make all types of funny and sometimes alarming noises for no reason that you can easily discern.

For instance, one common plumbing noise sounds like a hard knock or hammer blow. This usually occurs when you turn off a tap and can be rather alarming. Sometimes you can even feel the reverberation of the impact that caused the sound. But why is this happening? Usually, this “water hammer” noise is the result of the dramatic shift in pressure in the system when you suddenly stop the flow of water from a faucet.

This sudden stop creates a kind of shock wave, which then travels back through the pipes and causes the loud knocking sound that you hear. This is easily fixed with a device that is known as a water hammer arrester. These devices help to dissipate the force of the pressure shift and can keep the noise from occurring at all.

There are also all kinds of whistling, squealing and squeaking noises that your plumbing can make under certain circumstances. These types of sounds are often caused by a worn out washer somewhere along the line that is having trouble regulating the flow of water. It can be a little difficult to pin down the source of these noises sometimes, especially if they occur no matter which faucet is turned on. But with a little hunting and trial and error you or your plumber can usually track down the source.

Rattling sounds are also common and generally occur when your water pipes are not well secured to a rigid surface. If this is the case, the force of the water running through the pipes can cause the pipe to vibrate, creating the sound you hear as it bangs against whatever solid surface is nearby. For problems like this, simply securing the pipes in place better can put an end to all of your rattling issues.

Continue Reading

Unclogging a Floor Drain: A Tip From Buckingham

Wednesday, September 28th, 2011

It is never fun to wander down into the basement of your Buckingham home only to find that your floor drain has backed up. This is not a situation that will take care of itself and you want to get it under control as quickly as possible. While there are certainly plenty of things you can do to try and unclog a floor drain on your own, there are quite a few potentially complicating factors to consider as well.

First of all, you should make sure that no one in the house turns on any running water for anything until the drain has been unclogged. The floor drain in your basement is usually the last stop on the line for all of the water used in your house, and so any running water anywhere above will only cause more water to back up in the basement. Of course, if you cannot use any running water anywhere else in your house, it is even more imperative that you are able to unclog the floor drain quickly.

If you happen to have a snake on hand, this may be the best option to try first. However, it can be a bit difficult to get the snake to make the sharp turn typical of these types of drains not long after the pipe descends below the floor. That is not to say that it cannot be done, but you should be aware that you need to make sure the snake turns the corner before it will be useful to you at all.

If you do not have a snake of your own, you may still be able to take care of the blockage without calling in a professional plumber. But first you have to find it. Depending on the layout of your drainage system, this may be easier said than done. You can also make a pretty big mess if you open up various sections of pipe looking for the blockage, so be aware and make sure you have something in place to catch the runoff and debris that may come out of the pipes when you open them.

You may also run into trouble if the blockage is actually outside of your house in the larger sewer line that runs to the street. Unclogging a drain with this type of problem is generally a job for a professional and there is very little you will be able to do on your own.

Continue Reading

The Technology of Video Pipe Inspection: Some Pointers

Monday, September 26th, 2011

Let’s face it – technology is the answer for everything, from Souderton to Maple Glen. If it’s mechanical, it has been affected by technology. The world of plumbing is no exception. Technology now makes it possible for people to look inside the piping in their home – to get the “inside story” on why a pipe is blocked up or why water is flowing too slowly. A trained expert can use video pipe inspection technology to quickly diagnose a problem in order to find a solution.

So what types of technology are available today? Before we get to that, remember that technology is fluent. By the time you read this blog there may be something new to make this material outdated. The best way to keep up with the latest technology of video pipe inspection is to talk to your local plumbing professionals and check out updates on the Web.

The technology you will see in your home can be viewed live or via digital recording. The camera and its scope can grab a birds-eye view of the pipe without the need to unscrew fittings and elbows and without having to make a mess of things.

Plumbers making a service call who use video inspection will usually show homeowners some live pictures from inside their pipes or use a digital reproduction in their sales presentation. In either case, the camera doesn’t lie and repairs are quickly supported by video evidence.

Here are some of the components involved in the technology of video pipe inspection. First and foremost is the camera itself, which usually will have high definition image display, recording, and playback capabilities. Images can be stored on flash cards for downloading onto other computers or to the Web. The lens of the camera is mounted into the head of the scope, which could be made of fiber optic or fiberglass material. The scope or “snake” comes in a variety of lengths. Images from the camera can viewed on monitors of various sizes in color or black-and-white.

Other options may include audio capabilities for a plumbing professional to record what the camera sees and explain the problems and solutions to homeowners via voiceover technology.

According to one plumber who utilizes this type of technology, video pipe inspection provides “an assessment of pipe’s structural integrity, detection of blockages, breaks or defects, still image/video footage for client use, and first-time mapping or updates.”

If you want to utilize the latest technology to diagnose pluming problems in your home, call your local plumbing professional and ask for a video pipe inspection.

Continue Reading

Water and Energy Saving Tips

Friday, September 23rd, 2011

The cost of the heat, air conditioning and water supply to your Solebury home continues to rise – it’s no wonder you want to cut your bills so much. But, how can you do that without cutting into the creature comforts and conveniences you’ve gotten used to over the course of the last few decades? Here are a few simple energy and water saving tips to make your life easier.

  • Patching Leaks – Two of the biggest wasters of water are dripping faucets and leaky pipes. The amount of water wasted by a single drip every second could provide for multiple baths per year – it adds up fast. Not only are leaky faucets and pipes easy to fix; they tend to develop into bigger problems as time passes.
  • Drains and Flushing – If you put a piece of toilet paper in the toilet used to clean an eye or wipe the counter, don’t flush. It’s a waste of water. If you notice some extra toothpaste in the sink, don’t rinse yet. You can always use the water from brushing your teeth or washing your face to clean it out. Multi-task and minimize how much water goes down the drain to save water.
  • Fully Loaded – A partially filled washing machine or dish washer is a huge waster of water. Fill it up and wait to run the device until it’s at the brim – the same amount of water is used no matter how much is in the device.
  • Compost vs. Disposal – A garbage disposal wastes a tremendous amount of water (if you want it to run properly). So, instead of churning the disposal up, create a compost pile and save a great deal of water/energy. If you have a septic tank, a garbage disposal is especially bad for your home as it can fill the tank up quickly with solids.
  • Lower Water Flow – Don’t crank your faucets up to the max just to get a glass of water or to check for hot water. It’s a waste of energy and it’s often unnecessary, especially when waiting for water to hit the right temperature.

If you’re interested in getting the most out of your home’s water supply, there are hundreds of little ways to save water that will add up over time. These are just some of the easiest ways to get started. If you need more tips, contact your plumber.

Continue Reading

Time is Running Out: Don’t Miss $200 Off Any GE Geospring Hybrid Water Heater!

Thursday, September 22nd, 2011

Don’t hesitate and miss out on this great deal: the $200 Off Any GE Geospring Hybrid Water Heater expires 09/30/11!

This month only we are offering an incredible deal on the GE Geospring Hybrid Water Heater – $200 off! To make this deal even better, with the purchase of this water heater you can get a $300 Federal Tax Credit and a $300 PA Utility Rebate!

Not only are you saving a net of $800 on the installation of this electric heat pump water heater, the savings will keep on adding up for years to come.  The GE Geospring Hybrid Water Heater costs less than a traditional electric water heater operate because it is so much more energy efficient, up to 62 percent! It also has an electronic LCD display to easily control the 5 available modes, including a high demand mode and a vacation setting, so you can make sure that you always have enough hot water for your needs. The GE Geospring Hybrid Water Heater is a great upgrade for any home!

If you have any questions about the GE Geospring Hybrid Water Heater, please give us a call today!

Offer expires 09/30/11.

Continue Reading

Pipe Inspection Camera: When to Use One

Wednesday, September 21st, 2011

For plumbers today, anywhere from Maple Glen to Willow Grove, pipe inspection cameras are a huge aide. In the past, it was often very difficult to determine the location of a blockage or a leak, or indeed if one even existed at all. But now with this great modern equipment, it is much easier to get a thorough picture of the exact state of a pipe system and the nature of a potential problem.

These types of inspection cameras are especially useful when a clog is located underground or when an underground leak is suspected. Many types of plumbing problems can have multiple possible causes. But with pipeline inspection cameras, you can know for sure quickly exactly what type of problem you are dealing with.

For instance, even if you know that an underground pipe is leaking, it can be next to impossible to figure out exactly where the leak is. But to fix the leak you will have to unearth the damaged section of pipe and repair it. If you cannot pinpoint the leak precisely, you will be forced to unearth a large section of pipe. This takes a long time and causes unnecessary, although hopefully temporary damage to your yard as well.

However, if you can determine exactly where the leak is, you can dig up only the affected portion of pipe. This saves a lot of time and labor and it also means that you can limit the disruption the work causes in your yard. And the best way to find a leak like this is to use a pipe inspection camera to get a look at the inside of the pipe before you ever begin digging.

You do not need to wait for an emergency situation to develop to make use of a pipe inspection camera either. This technology is also extremely useful during annual drainage and sewer maintenance visits to help ensure that there are no unnoticed problems lurking below the surface. It is perfectly possible that one of your pipes is getting close to cracking but has not done so yet. The repairs can be a lot simpler if you catch this type of problem early, and that is exactly what a pipe inspection camera makes possible.

Pipe inspection cameras are also useful during maintenance visits because they allow technicians to determine which parts of your system need the most work. They can see where the larger buildups are and get the job done quicker overall than they could if they were operating blind.

Continue Reading

Things You CAN Do Yourself around the House: A Guide From Abington

Monday, September 19th, 2011

If you own a home in Abington, there are a lot of fun ways you can stay on top of regular maintenance without spending hundreds of dollars to hire a contractor. Sure, there are some tasks only a contractor should perform, but there are plenty of others you can take care of with a little spare time on the weekend.

  • Fixing Leaks – Unless it’s in a main line or in your sewer, you can usually fix a leak or clog in your pipes by yourself. Replacing a faucet, snaking a line, or taking apart a fixture should still be done with the help of manufacturer’s guidelines, but as long as you turn the water supply off correctly, you should be okay taking things apart and making quick repairs.
  • Yard Installations – Short of digging it up (always have it checked for gas and electricity lines), you can do pretty much anything on your own in the yard. This includes composting, landscaping, adding a barbeque pit or upgrading your back porch.
  • Painting – Feel free to paint anything in or around your home without the help of a pro. Just make sure to use proper ventilation and to ensure that you remove any old paint carefully. If you’re not sure about the age of your paint, it should be tested for lead before you chip it clean, especially if you have children.
  • Replace Appliances – Old appliances can be removed and replaced relatively easily as long as you have someone to help you get rid of the old ones. Also, if you have a gas stove or other appliances that run on gas, always have them checked by a professional. Never unplug gas lines without someone there to ensure the gas supply to your home is off.
  • Tiling – Tiling is something anyone can do, but make sure you’re ready for the time commitment. Especially if you plan on putting tiles on a wall, it’s easy to make a mistake and ruin good tiles or good walls. Also, proper sealing around water fixtures like a bathtub or sink is vital. If you’re not sure, call a plumber to help.

There are a lot of ways you can have fun and fix up your house without paying for a professional’s help. But, remember not to take on jobs that are too much for you. If you aren’t sure how to complete a task or you want a second opinion, never be afraid to call a professional in for some help. Even if they just check your work, it will save you money and you get the satisfaction of having done the work yourself.

Continue Reading

How to Get Lime Out of Your Pipes (and Your Teapot): A Guide From Abington

Friday, September 16th, 2011

Lime deposits are what cause that white, chalky, filmy residue that you see on faucets, shower heads and tiles in your Abington home. Aside from being unsightly, lime deposits can also cause damage over time. Lime builds up inside the plumbing of your home, slowly degrading your pipes. Below are some tips to get rid of lime in common trouble spots.

Pipes

Lime most often builds up in pipes that carry hot water, since the water heater dissolves the lime in the water. The lime is then deposited on the inside of the pipes when it cools. Here are some steps to clear out the troublesome lime from those pipes:

  1. Turn off your water heater and drain it so it is about half full.
  2. Remove the pressure valve, being careful to follow the manufacturer’s instructions.
  3. Pour solvent into the heater through the open valve. There are commercial products available specifically designed to break up lime deposits, but white vinegar can be used as a cheaper and greener alternative.
  4. Replace the pressure valve, turn the heater back on and allow it to fill all the way.
  5. Turn on hot water faucets throughout the house. Let the water run until it runs clear or doesn’t smell of vinegar, depending on which solvent you used.

Kettles & Coffeemakers

Mineral deposits in a kettle or coffeemaker can cause your morning beverages to taste bitter. To clean them out, try these techniques:

  • Put 2 tablespoons of water softener in your kettle and fill it with water. Bring to a boil and rinse thoroughly. Alternatively, you can use a 1:1 ratio of vinegar and water, then let it sit overnight after boiling.
  • Fill your coffeemaker’s reservoir with water plus 2 tablespoons of water softener. Or, fill it entirely with white vinegar. Either way, run it through once that way, then a few more times with pure water to rinse.

For more obvious deposits, like faucets and tiles, usually a combination of hot water and either lime remover or white vinegar will do the trick. You can get more instruction on removing lime scale at HowToCleanStuff.net.

Those are the tried-and-true methods for making your pipes last by keeping lime at bay. Some plumbers will swear to you that putting magnets on your pipes will prevent lime from building up. Data to support that is inconclusive at best, although it can’t hurt to try.

Continue Reading

$200 off Any GE Geospring Hybrid Water Heater!

Wednesday, September 14th, 2011

This month only we are offering an incredible deal on the GE Geospring Hybrid Water Heater – $200 off! To make this deal even better, with the purchase of this water heater you can get a $300 Federal Tax Credit and a $300 PA Utility Rebate!

Not only are you saving a net of $800 on the installation of this electric heat pump water heater, the savings will keep on adding up for years to come.  The GE Geospring Hybrid Water Heater costs less than a traditional electric water heater operate because it is so much more energy efficient, up to 62 percent! It also has an electronic LCD display to easily control the 5 available modes, including a high demand mode and a vacation setting, so you can make sure that you always have enough hot water for your needs. The GE Geospring Hybrid Water Heater is a great upgrade for any home!

If you have any questions about the GE Geospring Hybrid Water Heater, please give us a call today!

Offer expires 09/30/11.

Continue Reading

How to Fix a Slow Drain: A Tip From Warminster

Monday, September 12th, 2011

Ever fill up a bathroom bowl or kitchen sink in your Warminster home with water and then wait forever for the water to drain? A clogged drain can take forever to free up and is often the source of frustration and a loss of precious time as you get ready for work or play.

The solutions to fixing a slow drain can be very simple or complex, requiring a little patience or expertise to a major service or repair bill. Let’s hope the solution is the former and not the latter. And here are some suggestions.

If your bathroom sink is draining slowly, remove the stopper and inspect it for any “cling-ons” – namely hair. One of the most common clogs can be hair wrapped around the shaft of the stopper. Remove the hair, replace the stopper, run some hot water and check to see how quickly the water drains down. If that simple fix doesn’t work, dig a little deeper.

Hair can be tangled in the flange or the horizontal rod and clip, further down the pipe. You may need to dig out the hair or debris with a long object like a screwdriver or wire hanger. Don’t bring out the “big guns” like a snake or auger if something simpler will do the trick.

Once the debris is cleared, you may even want to use a small hand plunger to force air down the pipe and remove any other residual debris that may be slowing down the water flow. These steps should clear up the problem. A liquid or granulated drainer cleaner may also break up the clog. Running hot water can do the trick, too.

If these solutions don’t work, a slow drain could be the result of a more serious problem. At that point you may want to use a snake on the problem or call a professional plumber to fix it.

If your kitchen sink drains slowly, the problem could be a build-up of food or grease in the pipes. Once again, using a plunger or chemical drain cleaner may solve the problem. But don’t discount the fact that something may be blocking the pipes, like a piece of bone or a child’s small toy (if you have a mischievous toddler). A visual check of the problem might be the simple solution to the slow drain “mystery.”

If you are at your wit’s end and the water drainage continues to be a problem, call a professional plumber. They may even be able to walk you through a cleaning process over the phone.

Continue Reading